Assembly
34
10.00 | SWS 005 – 300 | Assembly and Operating Manual | en | 389456
Unlock Sensor
Lock Sensor
Off
On
SWK in the locked position with a SWA in place. The lock sensor is
activated by the detection shaft.
5.8.2 Piston Stroke Control integrated in the body
Integrated proximity
switch
NOTE
Sizes SWS-040Q/046/076/110/160 are equipped as a standard
with integrated Lock and Unlock sensing built into the Tool
Changer body.
Unlock Sensor Assembly
Lock Sensor Assembly
The sensors of the sensor assemblies are precision aligned at the
factory and there is no need to adjust them. You should only
change the whole assemblies. If sensors are not used, plugs will be
provided to seal the locking mechanism.
To Next Page
Loading...
