SCHUNK SWS Series - Page 17

Basic safety notes
10.00 | SWS 005 – 300 | Assembly and Operating Manual | en | 389456
17
WARNING
During operation, the area between the Quick-Chance-Head
SWK and Quick Change Adapter SWA must be kept clear.
Failure to keep area clear will result in damage to Tool Changer,
modules , or end-of-arm tooling and could cause injury to
personnel.
WARNING
Using the Tool Changer in applications other than intended will
result in damage to Tool Changer, modules, or end-of-arm
tooling and could cause injury to personnel.
• The Tool Changer is only to be used for intended applications
and applications approved by the manufacturer.
CAUTION
The SWK locking mechanism must not be actuated without
being mounted to the robot interface plate.
Damage to the Cover Plate and O-ring may result.
• Always attach the SWK to the Robot interface plate prior to
attempting any operations.