SCHWIND Carriazo-Pendular - Labelling; Labelling Pendular Device; Labelling Disposable Blades - Packaging Option a; Figure 2-1: Position of Carriazo-Pendular Type Label Example - Rear Side of the Console

USER MANUAL (Instruction for Use) SW 2.9
Safety
Version 2.9.7 dated 2020-12-23 Page 20 of 75
_
2.10 Labelling
2.10.1 Labelling Pendular Device
Type Label
Figure 2-1: Position of Carriazo-Pendular type label example - rear side of the console
IMPORTANT NOTE
The availability of disposable blade packaging (option A or option B) as specified
in the following chapters 2.10.2 and 2.10.3 varies with supply and regulatory
status.
2.10.2 Labelling Disposable Blades - Packaging Option A
Type Label Primary Packaging
Position: One piece, at the backside of each
primary blade package
Figure 2-2: Example of type label Carriazo-Pendular disposable blades – primary packaging