USER MANUAL (Instruction for Use) SW 2.9
Maintenance, Function Control and Storage
Version 2.9.7 dated 2020-12-23 Page 64 of 75
_
Description of fuses:
T 3.15 A L / 250 V
9.4 List of Parts
Regarding the current article numbers of the parts and accessories/components, refer to the
packing list.
9.5 Storage
Dry all provided parts (rings, tonometer, motor, motor cable and cutting head and motor cover)
carefully before storing in a dry and dust free container.
If the system is not used for a long period, it should be cleaned and stored in a dry, non-corrosive
atmosphere.
Sterilisation tray
All autoclavable parts like suction ring, cutting
head, motor cover etc.
Plastic holder for Carriazo-Pendular drive
For upright storage of the Carriazo-Pendular
motor (no cutting head mounted)
CAUTION
Do not store wet parts in plastic bags in the instrument etui!
Danger of corrosion!
For storage of your instruments use the sterilisation tray only!
Individual cutting heads must be stored separately, in order to avoid scratching.
Store the electrical drive perpendicularly, in order to avoid the penetration of
liquid into the drive!
Rating of voltage
Rating of current (Amp rating)
To Next Page
Loading...