24
SCIFIT Scientic Solutions For Fitness SCIFIT Scientic Solutions For Fitness SCIFIT
SPECIFICATIONS
MECHANICAL PARTS REMOVAL/REPLACEMENT
Secure the pivot link and the assembly link
to the lower outer handle with a 1/4” allen
hex and a torque wrench set at 720 in/lbs.
Step 3:
Step 4:
Secure the hardware of the upper pivot link
to the pivot blade using a 3/8” allen hex
and a torque wrench set at 720 in/lbs with
a 5/8” socket attached.
3/8” Allen Hex
5/8” Socket
Torque Wrench
5/8” Socket
1/4” Allen Hex
Torque Wrench
Follow the steps in the “Left Pivot Link Replacement” section for the right pivot link #A5474.
SPECIFICATIONS
rIghT pIvoT LInk rEpLAcEmEnT
To Next Page
Loading...
