SCIFIT STEP ONE

To Next Page

To Previous Page

SCIFIT Scientic Solutions For Fitness SCIFIT Scientic Solutions For Fitness SCIFIT

SPECIFICATIONS

MECHANICAL PARTS REMOVAL/REPLACEMENT

Unhook belt loop

from here

Step 4:

Unhook the belt loop from the end of the

belt tension spring.

Pull the belt (#A5164) out away from the

belt roller (#A1393).

Step 5:

There are two screws and nuts that secure

the belt clamp (#A5130) to the belt. Use

a 3/16’ allen hex on the at head screws

(#10537-08101) and a 1/2” wrench on the

nuts (#10537-08103) to LOOSEN, BUT

DO NOT REMOVE, so the belt may be

removed.

Step 6:

3/16 Allen hex

1/2 Wrench

SCIFIT STEP ONE - Page 41