SCIFIT STEP ONE - Page 52

49
SCIFIT Scientic Solutions For Fitness SCIFIT Scientic Solutions For Fitness SCIFIT
SPECIFICATIONS
MECHANICAL PARTS REMOVAL/REPLACEMENT
Step 5:
Remove the bearing cover (#A5183) and
clutch/pulley assembly (#A1375) off of the
shaft.
Outer bearing
adapter
Clutch/Roller
assembly
The clutch/pulley will only turn in one
direction. When placing it onto the shaft
verify the clutch/pulley only turns freely in
the direction of the brake.
Clutch/Roller will turn
freely counterclockwise
Step 1:
SPECIFICATIONS
LEFT cLUTch/pULLEy rEpLAcEmEnT
* Snap ring pliers Tools Required:
SPECIFICATIONS
rIghT cLUTch/pULLEy rEmovAL
Follow the steps in the “Left Clutch/Pulley Removal” section for the right clutch/pulley #A1375.