SPECIFICATIONS
ELECTRICAL PARTS REMOVAL/REPLACEMENT
67
SCIFIT Scientic Solutions For Fitness SCIFIT Scientic Solutions For Fitness SCIFIT
Disconnect the mid and magnet cables,
so the cable may pulled out from the
machine.
Step 3:
SPECIFICATIONS
mID-cABLE rEpLAcEmEnT
Route the mid-cable through the frame channel as it was removed..
Step 1:
Reconnect the mid-cable to the magnet cable.
Step 2:
Step 3:
Reattach the covers and console according to the “Lower/Upper Cover” replacement procedure on page 31.
To Next Page
Loading...
