Need help?Do you have a question about the Scott Safety ELSA and is the answer not in the manual?
Key safety and operational guidelines for servicing breathing apparatus.
Guide on the structure and content of the service manual for effective use.
Instructions for identifying and ordering necessary replacement components.
Overview of the ELSA escape breathing apparatus and its purpose.
Detailed component and functionality description of the ELSA apparatus.
Technical specifications and materials of the HD-3 hood.
Procedures for HD-3 hood inspection, repair, and part replacement.
Technical overview of the Reducer/Cylinder Valve (RCV-2) for ELSA.
Recommended service intervals and required tasks for the RCV-2.
Step-by-step guide for dismantling, servicing, and testing the RCV-2.
Comprehensive list of tools required for breathing apparatus servicing.
Procedure for setting and verifying the constant flow rate of the apparatus.
Method for confirming the integrity of the apparatus against air leakage.
Key safety and operational guidelines for servicing breathing apparatus.
Guide on the structure and content of the service manual for effective use.
Instructions for identifying and ordering necessary replacement components.
Overview of the ELSA escape breathing apparatus and its purpose.
Detailed component and functionality description of the ELSA apparatus.
Technical specifications and materials of the HD-3 hood.
Procedures for HD-3 hood inspection, repair, and part replacement.
Technical overview of the Reducer/Cylinder Valve (RCV-2) for ELSA.
Recommended service intervals and required tasks for the RCV-2.
Step-by-step guide for dismantling, servicing, and testing the RCV-2.
Comprehensive list of tools required for breathing apparatus servicing.
Procedure for setting and verifying the constant flow rate of the apparatus.
Method for confirming the integrity of the apparatus against air leakage.
General| Usage | Escape from hazardous environments |
|---|---|
| Air Supply | Compressed air |
| Duration | 10 or 15 minutes |
| Standard | EN 1146 |
| Regulator | Automatic |
| Mask Type | Hood |
| Standards Compliance | EN 1146 |
| Type | Emergency Escape Breathing Apparatus (EEBA) |
| Cylinder Material | Steel or Composite |
To Next Page
