Scott Safety ELSA - How to Use This Manual

IN-1 INTRODUCTORY NOTES
4. HOW TO USE THIS MANUAL
4.1 CONTENTS OF THIS MANUAL
This Manual is comprised of the following information:
i) Introductory Notes - (this section);
ii) Product Module - (providing specific information for the complete apparatus);
iii) Component Modules - (detailing specific information for sub-assemblies of the
complete apparatus);
iv) Tests and Toolkit Section - (explaining relevant test procedures and giving
details of any toolkit that may be required in order to service and maintain the
apparatus).
The Product Module contains the following information:
• Introduction - (general notes for guidance);
• Apparatus Description - (a technical description of the composition and
function of the apparatus);
• Recommended Service Schedule - (detailing the minimum scheduled
maintenance required to ensure that the apparatus is maintained in a fully-
operational state);
• Service Instruction Index - (listing the Component Modules used in the
apparatus along with the specific identity of each Module);
• Fault-finding Chart - (providing possible causes of faults and detailing remedial
action);
• General Assembly Instructions - (giving details of how to remove component
sub-assemblies from and re-assemble component sub-assemblies to the
complete apparatus);
• Assembly Diagram and Parts List - (showing line-drawings of component
sub-assemblies in their relative position with each other and providing Article
Numbers for each sub-assembly where applicable).
Each Component Module contains the following information:
• Technical Description - (a technical description of the composition and
function of the particular component or sub-assembly);
• Tools - (a list of the tools required to service the component or sub-assembly);
• Recommended Service Schedule - (detailing the minimum scheduled
maintenance required to ensure that the component or sub-assembly is
maintained in a fully-operational state);
• Servicing Instructions - (giving details of how to dismantle and re-assemble
the component or sub-assembly);
• Assembly Diagram and Parts List - (showing line-drawings of component
parts in their relative position with each other and providing Article Numbers for
replacement parts where applicable).
IN-1 (Page 4) Issue A 01. 2009