RCV-2 REDUCER/CYLINDER VALVE
2. TOOLS
The following tools are required to service the reducer/cylinder valve:
Item
(A)
Article No.
1033841
Description
Torque Wrench
Remarks
(B) 1033800 Socket Handle 3/8” Square Drive
(C) 1033967 Crowfoot Spanner 27mm A/F
(D) 1033983 3/8” A/F Socket 3/8” Square Drive
(E) 1033999 Reducer Cap Tool 3/8” Square Drive
(F) 1033705 Spanner 13mm x 17mm A/F
(G) 1033790 Instrument Screwdriver
(H) 1033710 Allen Key 2mm A/F
(I) 1033794 O-Ring Tool
(J) 1033987 Piston Seat Removal Tool
(K) 1025884 Krytox Grease
(L) 1034527 Loctite 542 10ml bottle
(M) 1017147 Loctite 222 10ml bottle
CAUTION:
Set the Torque Wrench as required and apply force in the direction of the arrow.
Once it has clicked DO NOT continue to apply force.
Note:
For full toolkit details, please refer to the Toolkit Module within the Tests and Toolkit
section.
RCV-2
(Page 2) Issue D 10. 2009
To Next Page
Loading...
