INTRODUCTORY NOTES IN-1
The Tests and Toolkit Section contains the following information:
• Tests - (explaining the procedure for carrying out specific tests on the
apparatus and detailing the criteria and course of action for successful and
unsuccessful test results);
• Toolkit - (providing Article Numbers and descriptions of the toolkit and its
contents).
4.2
ASSEMBLY DIAGRAMS AND PARTS LISTS
An Assembly Diagram and Parts List are provided at the end of each Product and
Component Module. In some cases, more than one Assembly Diagram and Parts List
may be present.
The objectives of each Assembly Diagram and Parts List are to:
• Assist with component identification by providing a line-drawing of each
component relevant to the particular Module. Each component is shown in its
relative position;
• Clearly show the relationship of individual components to higher levels of
assembly;
• Identify which components will be included if an assembly is ordered;
• Provide Article Numbers for those components which may be ordered as
replacement parts;
• Identify those components which may not be ordered individually as
replacement parts;
• Provide a meaningful description of each component;
• Inform the reader of any further information that may be relevant to a particular
component, for example: component dimensions, specific application, or the
quantity of components supplied in the pack against a given Article Number.
The following example shows a typical Parts List and provides guidance on how to
interpret the information contained:
Issue A 01. 2009
IN-1
(Page 5)
To Next Page
Loading...
