2/12 Ref. GPAO : 33522111601 Ref. Const. 5490 326 4000
A = Generating set model
B = Generating set output
C = Voltage
D = Amperage
E = Current frequency
F = Power factor
Example of an identification plate
G = Fuse rating
H = Generating set
noise output
I = Generating set earth
J = Reference Standard
K = Serial number
1.3. Instructions and safety regulations
1.3.1 Warnings
You are likely to encounter several warning symbols in this manual.
Danger
This symbol indicates a definite risk to the health and life of people. Not following this
instruction may seriously affect the health of people or prove fatal.
Warning
This symbol draws attention to the potential risk to the health and life of people. Not
following this instruction may seriously affect the health of people or prove fatal.
Warning
This symbol indicates a dangerous situation if the warning is not heeded.
Not following this instruction could result in non-serious injury or damage.
1.3.2 General advice
One of the fundamental safety considerations is observation of the interval between maintenance procedures (see
maintenance schedule). Furthermore, never attempt to carry out repairs or maintenance procedures without the
necessary experience and/or tools.
When you take delivery of your generating set, check that it is complete and not damaged in any way. A
generating set should be handled gently, avoiding brusque movements, and the place where it is to be stored or
used should be carefully prepared beforehand.
To Next Page
Loading...
Need help?
General
