1/12 Ref. GPAO : 33522111601 Ref. Const. 5490 326 4000
Contents
1. Introduction
2. General description
3. Preparation for operation
4. Using the generator set
5. Protective devices (if fitted, see specifications
table)
6. Maintenance schedule
7. Maintenance procedures
8. Storing the generating set
9. Troubleshooting
10. Specifications
11. Cable sizes
12. Warranty conditions
13. E.C. Declaration of conformity
1. Introduction
1.1. Recommandations
Thank you for buying one of our generating sets. We recommend that you read this manual carefully and follow
the safety and maintenance advice and user instructions for your generating set very closely.
The information contained in this manual is taken from technical data available at the time of print. In the
intention of permanently improving the quality of our products, this information may be amended without
warning.
We are interested in your comments!
This manual is updated regularly. We are interested in your comments and suggestions as they enable this
document to be made increasingly more useful.
You can contact us with any comments or suggestions at:
- fax: technical documentation department, number: + 00 33 (0)2 98 41 16 12
- by e-mail: doctech@sdmo.com
1.2. Pictograms and plates on the generating sets and what they mean
Danger
Warning: risk of electric
shock
Earth
Danger, risk of burns
1 2 3
1 - Important, refer to the documentation accompanying the generating set
2 - Warning, emission of toxic exhaust gases. Do not use in a confined or poorly ventilated area.
3 - Stop the engine before filling with fuel
Warning: oil is not included with the generating set.
Always check the oil level before starting the generating set.
To Next Page
Loading...
Need help?
General
