EC4 series integrated I/O user manual Use
Copyright © Nanjing Solidot Electronic Technology Co., LTD. 2023
After scanning the device, you can see the TwinCAT in the "OP" state at the "Online", and the slave
device RUN light can be observed long on.
4、 Data interaction
Analog output operation: take channel 0 output as an example, if the station equipment analog
output channel 0 output 10V voltage, can in TwinCAT Outputs corresponding "Online", "Chanenl0"
left click "Write", in the corresponding dialog, can see the corresponding channel light on, with the
To Next Page
