❶ Field associated with the
determination of the reference levels
(REF), before application of the vacuum.
Not configurable
❷ Field associated with the
measurements, in vacuum (TEST)
Configurable by the operator, between 20
seconds and 10 minutes, 120 seconds by
default
Refer to your country's regulations
❸ Go to the next step with the F3 key.
Confirm the selected choice with Enter
The next step is to fill in the information about the tank to be checked.
Before starting a test, it is usual to proceed to the gauge of the height of the liquid and water by means
of a pin inserted by the mechanical sleeve.
To Next Page
