SeaDoo RXP 4-Tec Supercharged User Manual


WARNING
To avoid possible injuries and cuts
from wakeboard’s fin(s), always
place FIN(S) OUTWARDS.
1
F18L3GY
1. Fin outward
F18L3HY
– After installation, pull and push
wakeboard to ensure it is tightly
secured to rack.

WARNING
If wakeboard is not properly se-
cured on rack, it could become
loose and detach unexpectedly,
creating a risk of injury to people
nearby. To avoid:
- Inspect bungee cords condition
and replace if damaged.
- Secure wakeboard properly on
rack.
- Periodically check that board is
properly attached.
F18L3IY
NOTE: When wakeboard is removed
from its rack, secure bungee cords so
that they will not move freely when
riding watercraft.
F18L3JY
_____________________
55
Print Preview Version 8.0 PubTeX output 2003.11.07:1153 File: C:\TEMP\.aptcache\smo2004-003en/tfa00394.dvi User: CASS2 Page: 57
www.SeaDooManuals.net

SeaDoo RXP 4-Tec Supercharged Specifications

General

Supercharger	Yes
Manufacturer	Sea-Doo
Model	RXP 4-Tec Supercharged
Category	Personal Watercraft
Fuel Type	Gasoline
Cooling	Closed-loop cooling system
Fuel Capacity	15.9 US gallons (60 l)
Width	48 inches
Seating Capacity	2
Oil Capacity	3.5 liters
Storage Capacity	10.7 US gal