– To add oil, unscrew oil cap. Place
a funnel into the opening and add
the recommended oil to the proper
level. Do not overfill.
NOTE: Every time oil is added in
engine, the complete procedure ex-
plained above must be done (en-
gine restarted, idling for 30 seconds,
30 seconds waiting time and then,
rechecking the oil level). This is re-
quired to allow the oil to properly
transfer in the different oil chambers
and to then level. Otherwise, you will
have a false oil level reading.
1
F18D09Y
TYPICAL
1. Oil cap
– Properly reinstall oil cap and dip-
stick.
Engine Coolant
Recommended Coolant
Always use ethylene-glycol antifreeze
containing corrosion inhibitors specifi-
cally for internal combustion aluminum
engines.
NOTE: When available, it is rec-
ommended to use biodegradable
antifreeze compatible with internal
combustion aluminum engines. This
will contribute to protect the environ-
ment.
Cooling system must be filled with wa-
ter and antifreeze solution (50% wa-
ter, 50% antifreeze).
Bombardier sells premixed coolant
with freezing protection up to -37°C
(-35°F) (P/N 293 600 038).
To prevent antifreeze deterioration, al-
ways use the same brand. Never mix
different brands unless cooling sys-
tem is completely flushed and refilled.
Refer to an authorized Bombardier
Sea-Doo dealer.
Coolant Level
WARNING
Check coolant level with engine
cold. Never add coolant in cool-
ing system when engine is hot.
Remove seat extension to expose
cooling system expansion tank.
1
F18E0MZ
ALL MODELS EXCEPT RXP
1. Expansion tank
2. Cap
60
______________________
Print Preview Version 8.0 PubTeX output 2003.11.07:1153 File: C:\TEMP\.aptcache\smo2004-003en/tfa00394.dvi User: CASS2 Page: 62
To Next Page
Loading...