EasyManua.ls Logo

SeaDoo RXP 4-Tec Supercharged - Page 62

SeaDoo RXP 4-Tec Supercharged
136 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
F19E01Y
2 1
RXP MODELS
1. Expansion tank
With vehicle on a level surface, liquid
should be between MIN. and MAX.
level marks of coolant reservoir when
engine is cold.
F18E0NY
1
1. Level between marks when engine is cold
NOTE: The watercraft is level when
it is in water. When on a trailer, raise
trailer tongue and block in this position
when bumper rail is level.
Add coolant to have the level between
marks as required. Use a funnel to
avoid spillage. Do not overfill.
Properly reinstall and tighten filler cap
then reinstall seat extension.
NOTE: A cooling system that fre-
quently requires coolant is the indica-
tion of leaks or engine problems. See
an authorized Bombardier Sea-Doo
dealer.
Coolant Replacement
Refer to MAINTENANCE section.
_____________________
61
Print Preview Version 8.0 PubTeX output 2003.11.07:1153 File: C:\TEMP\.aptcache\smo2004-003en/tfa00394.dvi User: CASS2 Page: 63
www.SeaDooManuals.net

Table of Contents