To Next Page

To Previous Page

N I

s m

s y

Shifter system/cable

I I D

VTS (Variable Trim System, (if so equipped)

I I D

Impeller shaft seal, sleeve and O-ring

(6)

Impeller and impeller/wear ring clearance

(2)

Water intake grate

(2)

Ride plate inspection including coolant leak

I I D

Drive shaft/hull sealing system

I I D

HULL AND BODY

Bailer pick-ups, check for obstructions

I I O

Hull

I I

Ski/wakeboard post and fasteners

I I O

NOTE: Some items are included in the PRE-OPERATION CHECKS and not nec-

essarily repeated in this chart.

D = Dealer, O= Operator

(1) In salt water use.

(2) These items have to be initially checked after 25 hours. Thereafter, servicing

to be made as specified in this chart.

(3) Daily flushing in salt water or foul water use.

(4) Perform every 200 hours or 2 years.

(5) Emission-related component.

(6) Replace after the vehicle completed 100 hours of use or 2 years.

(7) Replace for storage period or after 100 hours of use whichever comes first.

(8) Every 25 hours when riding in weed areas.

(9) Perform at storage period or after 100 hours of use whichever comes first.

(10) Perform every 200 hours not every 2 years.

______________________

Print Preview Version 8.0 PubTeX output 2003.11.07:1153 File: C:\TEMP\.aptcache\smo2004-003en/tfa00394.dvi User: CASS2 Page: 92

SeaDoo RXP 4-Tec Supercharged User Manual

Questions and Answers: