EasyManua.ls Logo

Seaga JDL-2 COMBO - Page 52

Seaga JDL-2 COMBO
78 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
52JDL V1.0 8 2022
Coin Changer Errors
Error Message Descripon Possible Soluons
Coin Mech Comm VMC does not have communica-
on with the coin changer.
Check MDB Harness to changer. Check for
power on changer. See changer service
manual.
Coin Mech Tube Sns The coin changer has reported a
tube sensor error.
See changer service manual.
Coin Mech Inlet The coin changer has reported an
acceptor blockage.
Check changer tubes. See changer service
manual.
Coin Mech Tube Jam The coin changer has reported a
tube payout error.
Check changer tubes. See changer service
manual.
Coin Mech ROM The coin changer has reported a
program memory error.
See changer service manual.
Coin Mech Excess Esc The coin changer has reported
that a large number of coin escrow
requests have occurred.
Check changer escrow lever posion.
Coin Mech Coin Jam The coin changer has reported that
a coin is jammed in the coin path.
Check changer coin path. See changer ser-
vice manual.
Coin Mech Low Accept The VMC has seen a low accep-
tance rate on coins.
Review inserted coins. See changer service
manual.
Coin Mech Accpt Disc The coin changer has reported
that the coin validaon acceptor is
disconnected.
Re-connect the coin changers acceptor. See
changer service manual.
Coin Mech Route Err The coin changer reported that
a coin did not follow the correct
path.
Check changer coin path. See changer ser-
vice manual.
Bill Validator Errors
Error Message Descripon Possible Soluons
Bill Val Comm VMC does not have communica-
on with the bill validator.
Check MDB Harness to validator.
Check for power on validator.
Bill Val Stack Full The bill validator has reported that
the stacker is full of bills.
Check bill stacker box for bills. See
validator service manual.
Bill Val Motor Err The bill validator reports that a val-
idator motor error has occurred.
See validator service manual.
Bill Val Jam The bill validator reports a bill is
stuck in the bill path.
Check validator bill path for bills.
See validator service manual.
Bill Val Stack Open The bill validator is reporng a bill
box is open or not installed.
Check bill stacker box for open lid.
See validator service manual.
Bill Val Sensor Err The bill validator reports a sensor
error.
See validator service manual.

Related product manuals