4) When completed, press the ESC button to exit.
B. Keyboard Test
The Keyboard Test function verifies if the keys are functioning
properly.
1) Use the UP/DOWN scroll button to select Keyboard Test from
the Tool Self-test menu, and then press the OK button.
2) Press any key to start test. When you press a key, the key name
should be observed on the display. If the key name does not
show up, then the key is not functioning properly. (Figure 3.10)
Figure 3.10
3) Double press ESC to return to previous menu.
C. LED Test
The LED Test function verifies if the I/M Readiness LED indicator
lamps are functioning properly.
1) Use the UP/DOWN scroll button to select LED Test from the
Tool Self-test menu, and then press the OK button.
2) In the LED Test menu, use the UP/DOWN scroll button to
select one or more LED lamps to check. The LED should turn
on or off according to the selected commands. (Figure 3.11)
Keyboard Test
Press any key to
start test
key:
Double [ESC] to return
To Next Page
Loading...
