Seaside 9357 - Test the Reversing Safety System

29
2、TEST THE REVERSING SAFET SYSTEM
1.7 Save the desired DOWN position by
press and release the SETTING Button. The
screen is flashing “｜｜”.
1.8 The garage door operator will automatically open the door again, then close
the door .
To prevent possible serious injury or death by a closing garage door, Please
correctly install reversing safety system and garage door operator.
The garage door must reverse on contact with a 1-1/2" (3.8cm) high object on the
floor.
The reversing safety system must be tested after any changes or adjustments.
Reversing Safety system MUST be tested monthly.
1.6 Use UP button and Down button to adjust until the desired close position is
found.
1.4 Save the desired UP position by
press and release the SETTING Button.
The screen will show “2”.
1.5 Press and hold the DOWN Button
to bring the door to the desired DOWN
position.
WARNING