Seaside 9357 - Page 42

42
open and close the door .
The light will flash.
Number
8
flashing
The door cannot move.
The light will flash.
Low power
voltage supply
Have the logic board replaced.
Number
3
flashing
The door cannot move.
The light will flash.
Bad logic board Have the logic board replaced.
Number
2
flashing
The door cannot move.
The light will flash.
Obstruction
during the door
movement.
1. Remove the obstruction, or contact a trained
garage door technician.
2. If the door moves okay, reprogram the travel
limits.
flashing
The door cannot move.
The light will flash.
power frequency
60 Hz signal
error
Check the input power.
flashing
The door cannot move.
The light will flash.
Bad logic board. Replace the logic board.
flashing
The door cannot move.
The light will flash.
Bad logic board. Replace the logic board.