6 •
17-10-07-651-100a/07-2019S
Preventing electric shock WARNING!
Electric shock
► Set up the device so that the power supply socket is easy to reach
and the device can be disconnected from the power supply quickly.
► Ensure that your local power supply matches the information on the
power supply unit.
► Do not touch the power supply unit with wet hands.
► Do not use extension cables or power strips.
► Make sure that cables are not pinched or damaged by sharp edges.
► Make sure that cables do not come into contact with hot objects.
► Do not operate the device at an altitude of more than 3000 m above
sea level.
Preventing injuries and infections WARNING!
Injury from falls
► Ensure that the device is positioned firmly and level.
► Route connecting cables (if present) in such a way that neither user
nor patient can trip over them.
► The device is not designed as a standing aid. Assist people with
limited motor skills when they are getting up, e.g. from a wheelchair.
► Make sure that the patient does not step onto and off the weighing
platform right at the edges.
► Make sure that the patient steps onto and off the weighing platform
slowly and safely.
WARNING!
Danger of slipping
► Ensure that the weighing platform is dry before the patient steps
onto it.
► Ensure that the patients feet are dry before he or she steps onto the
weighing platform.
► Make sure that the patient steps onto and off the weighing platform
slowly and safely.
WARNING!
Risk of infection
► Before and after every measurement, wash your hands to reduce
the risk of cross-contamination and nosocomial infections.
► Hygienically reprocess the device regularly as described in the
respective section in this document.
► Make sure that the patient has no infectious diseases.
► Make sure that the patient has no open wounds or infectious skin
alterations, which may come into contact with the device.
To Next Page
Loading...
