IHD paired successfully
icon in the top left-hand corner of the display indicates
that your Pipit is now paired with smart meter. Press OK. You
will see the start up screen followed by your energy usage
display.
IHD pairing unsuccessful
icon in the top left-hand corner of the display indicates
that your Pipit is not paired with smart meter. This can
happen due to communication failure. Try pairing by pressing
the Try again button or, if you are pairing the unit second time
then you can also go to Menu > Settings > Advanced >
Network which will require you to enter a PIN.
To Next Page
Loading...
Need help?
General