Secure Pipit 500 Consumers Manual

38
Pairing
You can un-pair (or pair) your Pipit manually by using the Network button on the Advance settings (refer to the
‘Advanced Settings’ page). You will require the PIN code to do this.
You will see the following confirmation display on entering the correct PIN.
Press OK to proceed un-pairing.
Important: After manual un-pairing Pipit will start pairing automatically with the Smart Meter and will supersede the
manual pairing.

Secure Pipit 500 Specifications

General

Brand	Secure
Model	Pipit 500
Category	Monitor
Language	English