Do you have a question about the Securimax Smart-Vent and is the answer not in the manual?
Brand | Securimax |
---|---|
Model | Smart-Vent |
Category | Control Panel |
Language | English |
Explains how the system ventilates homes using warm roof air and filters.
Details available product variants based on home size and features.
Instructions for cleaning the control panel surface with a moist tissue.
Provides contact details for customer service and additional information.
Explains how to turn the Smart-Vent controller ON and OFF.
Shows the controller display states when the system is OFF or Active.
Details the default operating mode display showing temperatures and real time.
Shows how the display indicates if the heater is ON, Override, or Timer Mode.
Lists the options available within Setup Mode and how to enter it.
Explains how the controller uses a 2 or 3 speed motor for air flow and user control.
How the controller uses maximum temperature to vent air or drop fan speed.
How the controller uses minimum temperature to control fan speed drops based on heater status.
How the controller monitors filter usage and indicates when it needs replacement.
Allows the user to enable or disable the heater if it is installed.
Lets the user choose between Normal, Override, or Timer modes for the heater.
Allows forcing the heater ON for a set duration, independent of temperature.
Enables setting specific times for the heater to be active when temperature is low.
Provides access to contact information for assistance.
Instructions for setting the system's time, date, and day.
Controls fan operation when ceiling temperature exceeds the maximum threshold.
Procedures to lock and unlock the keypad to prevent accidental presses.
Restores factory default settings for temperature, fan speed, and heater.
Indicates a loss of communication between the controller and the ceiling unit.
Signifies a failure of the temperature sensor in the ceiling unit.
Indicates a failure of the temperature sensor in the control panel.