19
This is used to restore the
factory default settings for the minimum
and maximum temperature range, the fan
speed and the heater operation.
Reset is used when the householder needs
to clear all previous settings and start over.
Factory default settings are:
Max Temp 30C
Min Temp 5C
Fan 3 (Fast)
Heater Disabled
Heater Mode Normal
Unlike the other buttons RESET requires a
firm press in the centre of the circle until a
‘beep’ confirms entry to this function. This
has been designed deliberately to prevent
accidental RESET
If a system reset is not required, press
SELECT
System will return operation to Normal
Mode
If the system RESET is required press the
UP arrow
Then press SELECT
Note:
RESET does not function when Smart-Vent
is in the OFF mode
Reset System
=Yes
Smart-Vent
SELECT
...take control,ventilate for a healthy home!
System
Reset
Smart-Vent
Active
Ceiling= 24
.
C
Room= 20
.
C
Smart-Vent
OFF
RESET
RESET
SELECT
Ceiling= 24
.
C
Room= 20
.
C
Reset System
=No
7. Reset Function
To Next Page
Loading...