20
The Smart-Vent system monitors the
communications and performance of the
system.
If the Smart-Vent controller can not
communicate with the ceiling unit the
operational display flashes the error
message every 5 seconds:
If the temperature sensor in the ceiling
unit fails, the operation display flashes the
following error message every 5 seconds:
If the temperature sensor in the control
panel fails, the display flashes the following
error message every 5 seconds:
Note:
Errors #1 and #2 are critical and with
no communications or a failed ceiling
temperature sensor the ceiling unit shuts
down all relay control of the heater, fan
and damper. Error #3 is non-critical as the
control panel temperature is no-critical for
the operation of the Smart-Vent.
However in all cases please contact
Securimax for technical support
ph (09) 259-1662
Error #1
No Comms
8. Error Functions
Error #2
Ceiling Temp
Error #3
Room Temp
To Next Page
Loading...