Securlift Secur3 - Page 4

follows: IM_SEC3_02.01_en.docx
4/70
Signalisation
• 24 VDC – 1W per output
• Gong / voice announcer in 4 languages (standard) – other languages upon request
• car position indication: 1 wire per floor, 7 segment, dot matrix, LCD binary
• Other signalisation:
• car busy/coming
• car here
• car call registered
• landing call registered
• car direction
• hall lanterns - gong
• overload
• out of service
• fire recall/fireman’s drive
Protections
All SECUR 3 input/outputs are protected against:
• over-voltage (up to 125 VDC) • over current – short circuit
• electro-magnetic interferences (according to
EN standards)
• motor temperature protection: thermistors
or thermal relay
• lack/reverse phase
• max. run time
ELECTRICAL SPECIFICATIONS
Mains supply:
• standard: 220V, 230V, 380V, 400V – 3 phase - 50 Hz.
• optional: monophase 220V, 230V, 240V,
3 phase 208V, 415V – 50/60Hz.
Brake supply:
• standard: 200 VDC • optional: any other voltage
Valves supply:
• standard: 48 VDC • optional: all
Safety circuit with optoisolators:
• standard: 230 VAC – 48VDC • optional: 110VAC
Shaft positioning system
• bistable - monostable magnetic switches • absolute encoder by magnetic band
Options
• overload and full load function
• short floor functions
• car / landing priority
• car light – fan timer
• fire recall
• advance door opening
• fireman’s drive
• floor access by code or iButton
• out of service
• remote monitoring
Norms
• EN 81-1; EN 81-2
• A3 amendment
• EN 81-20; EN 81-50
• EN 81-21
• EN 81-70
• 95/16/CE
• Legge 13 – DM 236
• EN 81-72
• EN 81-73
• EN 81-80
• CE marking - 2014/33/UE directive
• EN 50081-1 electromagnetic emissions
• EN 50082-2 electromagnetic immunity