Securlift Secur3 - Sec-3 I;O - Extension Board

follows: IM_SEC3_02.01_en.docx
48/70
SEC-3I/O – extension board
SEC-3I/O board is the interface for car calls (over 16 services) or for some special function. Each board
collects up to 8 calls. Appropriate setting of dip-switches configures the board function.
LED’s
In the following tables all LED symbols are shown with power ON, with car parked at bottom floor, after
reset drive has been accomplished.
 = lit
 = off
 = blinking
PX (car calls - dip 3+6 ON)
1  Car call 1
2  Car call 2
3  Car call 3
4  Car call 4
5  Car call 5
6  Car call 6
7  Car call 7
8  Car call 8
9 +24 VDC lamps common
10 GND buttons common
PX (car calls - dip 3+6+1 ON)
1  Car call 9
2  Car call 10
3  Car call 11
4  Car call 12
5  Car call 13
6  Car call 14
7  Car call 15
8  Car call 16
9 +24 VDC lamps common
10 GND buttons common
PX (car calls - dip 3+6+2 ON)
1  Car call 17
2  Car call 18
3  Car call 19
4  Car call 20
5  Car call 21
6  Car call 22
7  Car call 23
8  Car call 24
9 +24 VDC lamps common
10 GND buttons common