EasyManua.ls Logo

Securlift Secur3 - Technical Specifications

Securlift Secur3
70 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
follows: IM_SEC3_02.01_en.docx
3/70
Technical specifications
BASIC SPECIFICATION
• Modular system up to 32 floors (64 services).
• microprocessor
• CAN (Controller Area Network) serial transmission from controller to:
• Car, landings, inverter
Interfaces
• Removable user interface for parameter setting and controller diagnostic:
• SECUR 3 system parameters
programming
• special functionalities (rescue drive, door
commands, calls, etc.)
• fault codes and diagnostic visualisation
• date/time setting
• inverter programming and diagniostic
• USB port for SW update and parameters backup
• Serial port for local or remote monitoring
Drives
Hydraulic lift:
• Power units: all
• direct starting, star/delta starting, soft
starter
Traction lift:
• Asynchronous motors
• Gearless Synchronous motors
• AC 1 / 2 speed
• V3F open loop
• V3F closed loop
Logic
• Push button
• Down collective, Up collective, Full collective
• Multiplex (up to 4 lift group)
Doors
• automatic, semi-automatic, swing doors
• single, double access
• contemporary or selective door opening
• parking either with opened or closed doors
• door operators type: all
Emergency devices
• manual lowering emergency feature
(standard on MRL Gearless installation)
• automatic emergency device for lowering
and doors opening
• auto-dialer
• SMS automatic transmission in case of alarms