Guardian Field Support Manual – Section 2
9
1. Select “Use the following IP
address:”.
2. In the IP address: field type
192.168.1.2.
3. Click into the subnet mask and it will
auto populate to 255.255.255.0.
4. Then click “OK” to save these
settings.
Note: When the connection is made between the Laptop and Guardian Controller Unit, the
Ethernet section will show “Network [#]” where ‘#’ depends on the numbers of networks that
have connected to your laptop previously.
To connect to the Guardian Controller, we recommend using Google Chrome setup on your
laptop (instructions at Part 3.3).
To Next Page
Loading...
Need help?
General
