Guardian Field Support Manual – Section 2
Installation of Hardware
• Complete the installation of
the system into the vehicle
System Checks & Configuration
• Follow the IVS Wizard steps
and confirm successful
completion
• Confirm the ICS is in the
correct position.
Photo Evidence of installation
• Take photos of each
component installed for
evidence of a quality install.
Call Support
• If you encounter any errors
during the install, as
prompted by the IVS Wizard,
• At the end of the installation.
Setup of Software
• Run through recovery process
using a Gen2 programmed
Recovery Dongle
• Connect your laptop
• Login through Chrome and
run through the IVS Wizard
To Next Page
Loading...
Need help?
General
