Seeing Machines G2-SY-CON2-1001272 User Manual

Guardian Field Support Manual – Section 2
37
Adjusting the FFC:
The 1.5mm Allen key is required to lock the
camera in position when the optimal camera
view has been achieved.
A cap is provided to clip over the lock to
prevent tampering.
It is recommended that the ‘Guardian’
symbol is level when mounted to the
windscreen, as shown in the image.
Note: You can adjust the FFC more
accurately when you complete the IVS
Installation Wizard as the video feed will be
displayed. Ensure that the field of view of the
FFC shows the forward roadway.
Important Points to Note:
Ensure that FFC is locked into position using the 1.5mm Allen key.

Seeing Machines G2-SY-CON2-1001272 Specifications

General

Brand	Seeing Machines
Model	G2-SY-CON2-1001272
Category	Measuring Instruments
Language	English