Seg WI Series Reference Manual

9.18.3
ExP[1]: Input States
ExP[1] . ExBlo-I [Operation / Status Display / ExP[1]]
Module input state: External blocking
ExP[1] . Trigger Signal-I [Operation / Status Display / ExP[1]]
State of the module input: External trigger signal
9.18.4 ExP[1]: Signals (Output States)
ExP[1] . Active [Operation / Status Display / All Actives]
[Operation / Status Display / ExP[1]]
Signal: active
ExP[1] . Trip [Operation / Status Display / Trips]
[Operation / Status Display / ExP[1]]
Only available if:
• ExP[1] . De󰊟nition = Trip•
Signal: Trip
ExP[1] . Alarm [Operation / Status Display / Alarms]
[Operation / Status Display / ExP[1]]
Only available if:
• ExP[1] . De󰊟nition = Alarm•
Alarm
ExP[1] . Pickup [Operation / Status Display / Pickups]
[Operation / Status Display / ExP[1]]
Signal: Pickup
104 WIC1 WIC1-2.0-EN-REF
9 Protection Parameter
9.18.3 ExP[1]: Input States

Seg WI Series Specifications

General

Brand	Seg
Model	WI Series
Category	Relays
Language	English