Seg WI Series Reference Manual

8.1.3
Modbus: Direct Controls
Modbus . Rst. Counters [Operation / Reset]
Inactive Inactive, Active
╚═▷ Mode
P.1
Direct Command to reset all Modbus Diagnosis Counters
Modbus . Slave ID [Device Para / Modbus / RTU]
1 1 . . . 247 P.1
Device address (Slave ID) within the bus system. Each device address has to be unique within a bus system.
8.1.4 Modbus: Values
Modbus . Comm.err. [Operation / Count and RevData / Modbus / RTU]
Grand total number of communication errors
Modbus . RX msg. [Operation / Count and RevData / Modbus / RTU]
Number of received messages / telegrams (since the last reset)
Modbus . Req.for me [Operation / Count and RevData / Modbus / RTU]
Total Number of requests for this slave.
Modbus . TX msg. [Operation / Count and RevData / Modbus / RTU]
Number of transmitted messages / telegrams (since the last reset)
Modbus . RX chars [Operation / Count and RevData / Modbus / RTU]
RX chars
Modbus . TX chars [Operation / Count and RevData / Modbus / RTU]
Number of transmitted characters (since the last reset)
35WIC1WIC1-2.0-EN-REF
8 Communication
8.1.3 Modbus: Direct Controls

Seg WI Series Specifications

General

Brand	Seg
Model	WI Series
Category	Relays
Language	English