Seg WI Series - Configuration of the Digital Inputs

SOTF . Trigger [Protection Para / SOTF]
Ipeak> . Pickup “-”, I> . Pickup, I>> . Pickup, I>>> . Pickup, Ipeak> . Pickup, Prot .
Pickup
╚═▷
P.1
Assign the type of pickup signal that triggers the SOTF module. If the assigned pickup signal is issued, the SOTF
module itself picks up.
SOTF . ExBlo [Protection Para / SOTF]
“-” “-” . . . Prot . Pos OFF
╚═▷
P.1
External blocking of the module if the state of the assigned signal is true.
9.17.3
SOTF: Input States
SOTF . ExBlo-I [Operation / Status Display / SOTF]
Module input state: External blocking
SOTF . Trigger-I [Operation / Status Display / SOTF]
State of the module input: Assign the type of pickup signal that triggers the SOTF module. If the assigned pickup
signal is issued, the SOTF module itself picks up.
9.17.4
SOTF: Signals (Output States)
SOTF . Active [Operation / Status Display / All Actives]
[Operation / Status Display / SOTF]
Signal: active
SOTF . Trip [Operation / Status Display / Trips]
[Operation / Status Display / SOTF]
Only available if:
• SOTF . De󰊟nition = Trip•
Signal: Trip
SOTF . Alarm [Operation / Status Display / Alarms]
[Operation / Status Display / SOTF]
Only available if:
• SOTF . De󰊟nition = Alarm•
Signal: Alarm
100 WIC1 WIC1-2.0-EN-REF
9 Protection Parameter
9.17.3 SOTF: Input States