Seg WI Series Reference Manual

I> . Alarm [Operation / Status Display / Alarms]
[Operation / Status Display / I>]
Only available if:
• I> . De󰊟nition = Alarm•
Signal: Alarm
I> . Pickup [Operation / Status Display / Pickups]
[Operation / Status Display / I>]
Signal: Pickup
I> . Trip IL1 [Operation / Status Display / I>]
Only available if:
• I> . De󰊟nition = Trip•
Signal: Trip due to a fault in phase L1
I> . Trip IL2 [Operation / Status Display / I>]
Only available if:
• I> . De󰊟nition = Trip•
Signal: Trip due to a fault in phase L2
I> . Trip IL3 [Operation / Status Display / I>]
Only available if:
• I> . De󰊟nition = Trip•
Signal: Trip due to a fault in phase L3
I> . Alarm IL1 [Operation / Status Display / I>]
Only available if:
• I> . De󰊟nition = Alarm•
Signal: Alarm due to a fault in phase L1
I> . Alarm IL2 [Operation / Status Display / I>]
Only available if:
• I> . De󰊟nition = Alarm•
Signal: Alarm due to a fault in phase L2
55WIC1WIC1-2.0-EN-REF
9 Protection Parameter
9.8.4 I>: Signals (Output States)

Seg WI Series Specifications

General

Brand	Seg
Model	WI Series
Category	Relays
Language	English