Seg WI Series Reference Manual

CT . IG meas RMS [Operation / Measured Values / Current RMS]
Avail. depends on device type.
Measured value (measured): IG (RMS)
CT . IG calc RMS [Operation / Measured Values / Current RMS]
Measured value (calculated): IG (RMS)
Since the value might be unreliable or invalid for low phase currents it is displayed as “-0.0” in this case.
CT . %IL1 THD [Operation / Measured Values / Current RMS]
Measured value (calculated): IL1 Total Harmonic Distortion
CT . %IL2 THD [Operation / Measured Values / Current RMS]
Measured value (calculated): IL2 Total Harmonic Distortion
CT . %IL3 THD [Operation / Measured Values / Current RMS]
Measured value (calculated): IL3 Total Harmonic Distortion
25WIC1WIC1-2.0-EN-REF
4 Field settings
4.1.3 CT: Values

Seg WI Series Specifications

General

Brand	Seg
Model	WI Series
Category	Relays
Language	English