Seg WI Series Reference Manual

Prot . TripCmd [Operation / Status Display / Trips]
[Operation / Status Display / Prot]
Signal: Trip Command
Prot . Alarm [Operation / Status Display / Alarms]
[Operation / Status Display / Prot]
Signal: General Alarm
Prot . Pickup [Operation / Status Display / Pickups]
[Operation / Status Display / Prot]
Signal: General Pickup
Prot . Trip IPh [Operation / Status Display / Prot]
Signal: General Trip due to a phase current fault
Prot . Trip IG [Operation / Status Display / Prot]
Signal: General Trip due to a ground current fault
Prot . Trip Ext. [Operation / Status Display / Prot]
Avail. depends on device type.
Signal: General Trip due to an external signal
Prot . Trip IL1 [Operation / Status Display / Prot]
Signal: General Trip due to a fault in phase L1
Prot . Trip IL2 [Operation / Status Display / Prot]
Signal: General Trip due to a fault in phase L2
Prot . Trip IL3 [Operation / Status Display / Prot]
Signal: General Trip due to a fault in phase L3
Prot . Pickup I Ph [Operation / Status Display / Prot]
Signal: General Pickup due to a phase current fault
Prot . Pickup IG [Operation / Status Display / Prot]
Signal: General Pickup due to a ground current fault
45WIC1WIC1-2.0-EN-REF
9 Protection Parameter
9.5 Prot: Signals (Output States)

Seg WI Series Specifications

General

Brand	Seg
Model	WI Series
Category	Relays
Language	English