If Inrush Blocking has been activated (see ╚═▷ “4.4 IH2 - Inrush Blocking”), select
whether this Earth (Ground) Overcurrent stage shall be blocked in case of an inrush
current:
• [Protection Para / I2>] »IH2 Blo« =•
Options:
◦ “Inactive” (no Inrush blocking of the ground overcurrent protection),◦
◦ “Active” (the Inrush Blocking module also blocks the ground overcurrent◦
protection).
To Next Page
Loading...
Need help?
General
