Seg WIC1-3 User Manual

1.3 Personal Safety
DANGER!
Ignoring the following safety messages can result in death or serious injury or physical
damage.
DANGER!
Only quali󰊟ed electricians may install, commission, work or operate this device.
All national standards – if applicable – must be followed.
DANGER!
The terminal block for connection to the current transformers is not a shorting block.
Therefore always short-circuit current transformers before loosening the terminals.
Ignoring this can result in dangerous voltages at the open contacts (up to dozens of
kilovolts depending on the CT type).
DANGER!
Even when the auxiliary voltage is switched o󰊞, it is likely that there are still hazardous
voltages at the component connections.
Upon opening the device, it is likely that some parts with high voltages become
accessible. Touching these is dangerous to life.
The device must be carefully grounded. See ╚═▷ “3.3.1 Grounding”.
15WIC1WIC1-1.0-EN-MAN
1 Safety Messages and Proper Use of the WIC1
1.3 Personal Safety

Seg WIC1-3 Specifications

General

Brand	Seg
Model	WIC1-3
Category	Relays
Language	English