Seg WIC1-3 User Manual

The DiggiMEC is an optional separate accessory.
• Use a standard network (Ethernet) cable to connect the WIC1 with the DiggiMEC.•
(See ╚═▷ “2.7 Settings – Operation”.)
(Note, however, that the communication between WIC1 and DiggiMEC is based on a
proprietary protocol.)
9.1.12 Self-Supervision Messages
The storage capacity for Self-Supervision messages (see ╚═▷ “6.2 Self-Supervision
Messages”) is as follows:
•
E – Errors – up to 37 messages. Each new error beyond this number deletes the
•
oldest error message.
• W – Warnings – up to 25 messages. Each new warning beyond this number deletes•
the oldest warning message.
• I – Information messages – up to 25 messages. Each new information message•
beyond this number deletes the oldest information message.
211WIC1WIC1-1.0-EN-MAN
9 Technical Data
9.1.12 Self-Supervision Messages

Seg WIC1-3 Specifications

General

Brand	Seg
Model	WIC1-3
Category	Relays
Language	English