Sega Grid 42 - Precautions When Moving (Eu Twin)

PRECAUTIONS WHEN MOVING THE MACHINE
31
7
Remove the Billboard Plate when
transporting the machine in and
out of buildings or when passing
through areas with low ceilings.
7-2 PRECAUTIONS WHEN MOVING (EU TWIN)
• Whenmovingthecabinet,donotgriporpushtheBillboardPlate.Doingso
coulddeformordamagethepart.
• Ifmovingthroughadoororplacewithalowceilingsuchasanelevator,you
shouldtakeapartthebillboardandbillboardplate.
• When movingthecabinetsitisimportantthatthecabinetsaresplitinto
individualunits.Tryingtomovethecabinetswhilstconnectedcancause
damagetoeitherorbothunits.
• Refer to Chapter 6 in this manual for Billboard and Billboard Plate removal.
Failingtofollowtheseinstructionscancausedamagetotheproduct.
Split the cabinet before
attempting to move in or out
of location. Failure to do so will
result in the product becomming
damaged.