46
EXPLANATION OF TEST AND DATA DISPLAY
9
9-2-4 OUTPUT TEST
Select ‘Output Test’ from the Test Menu to display the Output Test Menu.
This test is used to check the System Output on the Lamps in the cabinet.
Use the SERVICE button to move the cursor to the desired test item.
Press the TEST button to test the selected item.
START LAMP: ON/OFF
VIEW LAMP: ON/OFF
RECOVERY LAMP: ON/OFF
RACE LEADER LED: ON/OFF
TOP LED RED: ON/OFF
TOP LED BLUE: ON/OFF
TOP LED GREEN: ON/OFF
BASE LED RED: ON/OFF
BASE LED BLUE: ON/OFF
BASE LED GREEN: ON/OFF
Move the cursor to EXIT and press the TEST button to return to the Test Menu screen.
9-2-4 FIG. 01
To Next Page
Loading...
