The Interference Prevention Wiring
● This work should be performed by the site maintenance individual or other
skilled professional. Work performed by non-technical personnel can cause
malfunctioning.
● In order to prevent electric shock and short circuit hazards, be sure to turn
power off before performing work.
● Be careful not to damage the wires. Damaged wires may cause electric shock
or short circuit or present a re risk.
When the game machines of a same or similar type are installed side by side, their sensors may interfere with each
other. To reject the interference, follow the procedure below.
The following game machines employ a same or similar type of sensor. If interference happens to the sensors,
operation of the games may be mutually disturbed.
- THE HOUSE OF THE DEAD 2, U/R type, DX type and Super DX type
- DEATH CRIMSON, U/R type and DX type
- THE LOST WORLD, U/R type, DX type and Super DX type
- BRAVE FIRE FIGHTERS
- SAMBA DE AMIGO
- CONFIDENTIAL MISSION, U/R type and DX type
- SHAKATTO TAMBOURINE
- LUPIN THE 3RD THE SHOOTING, U/R type and DX type
- THE MAZE OF THE KINGS, U/R type and DX type
- THE HOUSE OF THE DEAD 3, U/R type and DX type
- VIRTUA COP 3, U/R type and DX type
- GHOST SQUAD, U/R type and DX type
- THE HOUSE OF THE DEAD 4 DX type and SPECIAL type
- 2SPICY
- RAMBO
1
Turn the power off.
2
Unlock the back door with the master key, and take it off.
To Next Page
Loading...
