4
K600000000SE 030804 011018
TABLE OF CONTENTS
8.5.9 Draft measurement pressure gauge compliant
with UNI 10845 standard. 26
8.5.10 Pressure Test Kit 27
8.5.11 Burner pressure verification probe 27
8.5.12 Connection to PC 27
8.5.13 Connection to battery charger 27
9.0 POWER ON - OFF 28
9.1 Starting the device 28
10.0 CONFIGURATION 30
10.1 Configuration Menu 30
11.0 MEMORY 72
11.1 Memory Menu 72
11.1.1 Memory Organization 74
12.0 PRINT 87
12.1 Print Menu 87
13.0 MEASUREMENTS 98
13.1 Measurements Menu 98
14.0 COMBUSTION ANALYSIS 147
14.1 Combustion Analysis 147
14.1.1 Switching on the instrument and auto-calibration 147
14.1.2 Inserting the probe inside the stack 147
14.1.3 Simultaneous pressure measurement, O
2
, pollutants 148
14.1.4 Flue Gas Analysis 149
14.1.5 End of Analysis 149
14.2 Combustion Analysis - Preliminary operations 150
14.3 Performing the Combustion Analysis - Manual mode 152
14.4 Performing the Combustion Analysis - UNI 10389 mode 154
14.5 Performing the Combustion Analysis - BImSchV mode 155
14.6 Performing the Combustion Analysis - Data logger mode 157
15.0 SENSORS 159
15.1 Sensors arrangement 159
15.2 Sensor types and relevant positioning 160
15.3 Gas sensors life 160
15.4 Sensor’s life expectancy table 161
15.5 Expandability to 6 sensors 162
15.6 CxHy sensor for measurement of the unburnt hydrocarbons 163
15.6.1 Installing the CxHy sensor 163
15.7 CO
2
sensor for Carbon Dioxide measurement in combustion processes 164
15.7.1 Installing the CO
2
sensor 164
15.8 NH
3
sensor for ammonia gas measurement in combustion processes 165
16.0 MAINTENANCE 166
16.1 Routine maintenance 166
To Next Page
Loading...
