49
K600000000SE 030804 011018
10.4 Configuration→Operator
CONTEXT KEY FUNCTION
Enters edit mode of the selected line: it is possible to enter the name of the
operator (24 characters available).
Confirms the selected letter or digit.
Cancels the letter or digit before the cursor.
Cycles through uppercase, lowercase, symbols and special characters.
Aa#
→
KEY FUNCTION
Activate the context keys shown on the display.
In "edit text": Moves the cursor on the box corresponding to the letter or
number required to form the word.
In "Operator Configuration": Scrolls through the available operators.
In "edit text": Confirms text input.
In "Operator Configuration": selects the operator who will carry out the
analysis; the operator is highlighted with the symbol "".
Returns to the previous screen.
In "edit text" goes back to the previous screen, without saving any
changes.
15/01/14
10:00
Configuration
Operator
Operator 8
Operator 7
Operator 6
Operator 5
Operator 4
Operator 3
Operator 2
Operator 1
To Next Page
Loading...
